Cheap Lanparte Battery Back Pack Plate Adapter Power Supply Pinch With Internal HDMI Splitter for Sony V-shoe V-Mount V-Lock Battery External / for DSLR Camera Video Light
- Mount Type: Sony V-shoe Mount.
- Can power an onboard camera light or broadcast accessory.
- Material: ABS Flame-retardant plastic and Aluminum
- Smart charging function.Built-in HDMI splitter.
- It is a device which can connect the battery and videoing devices together.
V-Mount Battery Plate for Sony V-Shoe Mount Batteries
Brand new battery plate for Sony V-shoe mount battery. It is a device which can connect the battery and videoing devices together.
With standard 60mm center to center 15mm rail holes, it can be mounted on the camera rig easily. Internal HDMI splitter capable of dividing a single HDMI stream into two outputs. Mounting plate for attaching and charging a V-mount battery. It can be used as a complete indoor power supply solution.
Smart charging function.
No voltage shortage.
Use high-class electronic components.
Can power an onboard camera light or broadcast accessory.
Type: Lanparte V-shoe Mount Pinch
Built-in HDMI splitter.
Output channels: 5V, 7.4V, 12V, 15V
With 15mm rod connector.
Over voltage protection: 0.5V
Short delay 1 second.
Working Temperature: -20°~45°
Temperature Rise: ?45? (full load)
Relative Temperature: ?90%
Relative Response Time: ?0.01s / ±1%
Output Precision: ?5m?
Material: ABS Flame-retardant plastic and Aluminum
Dimensions: Approx. 143.5X82X74.9mm/5.6X3.2X2.9”
Net Weight: Approx. 800g/28.2oz
Sony V-shoe mount Batteries
5V port for signal switch machine, such as an SDI to HDMI converter.
7.2V port outputs directly to power DSLR. (But needs an extra adapter, the adapter is not included)
12V port for the monitor and other 12V devices.
15V port direct output from the V-mount battery. This ensures that the battery plate correctly handles the voltage as the battery charges and discharges.
The original DSLR battery contains 2 cells with a combined voltage of 8.4V and thus, our 7.2V output is capable of supplying 8.4V for both charging and maintaining the battery.
The switch on the side controls the HDMI splitter. On will split the input, off will pass the signal through.
1× Battery Plate
1× Power Adapter (Europe Standard)
5× Connection Cables (Yellow: 2.1mm / Red: 1.35mm)